Cisco Aironet 2702i AIR-CAP2702I-E-K9 Dual-Band 802.11ac Access Point (Refurbished)

Cisco Aironet 2702i AIR-CAP2702I-E-K9 Dual-Band 802.11ac Access Point

The Cisco Aironet 2702i (AIR-CAP2702I-E-K9) is an indoor enterprise wireless access point with integrated antennas and the E regulatory domain. It is a controller-based Cisco Aironet 2700 Series access point designed for business WLAN deployments requiring dual-band 802.11ac Wave 1 connectivity, RF management and enterprise security.

Wireless specifications

• Exact manufacturer part number: AIR-CAP2702I-E-K9
• Product family: Cisco Aironet 2700 Series, 2702i
• Regulatory domain: E domain; confirm local country approval and permitted channels before installation
• Wireless standards: IEEE 802.11a/b/g/n/ac (802.11ac Wave 1)
• Radio bands: concurrent 2.4 GHz and 5 GHz radios
• Maximum 5 GHz PHY rate: up to 1.3 Gbps under supported 802.11ac channel configuration
• MIMO: 3x4 radio design with three spatial streams
• Internal antennas: integrated dual-band omnidirectional antennas; approximately 4 dBi peak gain
• Wireless features: Cisco CleanAir spectrum intelligence, ClientLink 3.0 beamforming, VideoStream, Radio Resource Management (RRM), rogue access-point detection and wireless intrusion detection/prevention features

Ethernet interfaces and power

• Primary Ethernet: 1 x 10/100/1000BASE-T RJ-45 Gigabit Ethernet port
• AUX Ethernet: 1 x 10/100/1000BASE-T RJ-45 auxiliary port supporting link aggregation
• Management: RJ-45 console port
• Powering: IEEE 802.3at PoE+, Enhanced PoE, or compatible Cisco Aironet 2700 power injector/local power supply
• Power limitation: with 802.3af power, the AP can operate in a reduced 3x3 radio configuration; use the specified power source for full supported performance

Physical specifications

• Dimensions: approximately 220.4 x 220.4 x 46.7 mm (8.68 x 8.68 x 1.84 in)
• Weight: approximately 0.86 kg (1.9 lb)
• Installation: indoor ceiling or wall installation using a compatible mounting bracket

Controller compatibility and deployment

This AIR-CAP model uses Cisco lightweight/controller-based software and communicates with a compatible Cisco wireless LAN controller using CAPWAP. Confirm controller model, AireOS/software release, regulatory domain and supported feature set before deployment. This is the internal-antenna 2702i; do not confuse it with the external-antenna 2702e or a different regulatory-domain SKU.

Condition and package contents

Confirm the supplied unit's exact product label, used/refurbished condition, mounting bracket, power injector or power supply and included accessories before ordering. Controller, licenses, power accessories and cabling are not included unless expressly listed.

SEO keywords: Cisco AIR-CAP2702I-E-K9, Cisco Aironet 2702i, Aironet 2700 Series access point, 802.11ac Wave 1 wireless AP, dual-band enterprise access point, 1.3Gbps Cisco WiFi, internal antenna Cisco AP, E regulatory domain access point.